شرکت صنعت آفرین ماهان

It was established in 1385 as a manufacturer of all kinds of automotive catalytic converters with the main goal of reducing air pollution with the slogan of breathing clean air. In order to satisfy the customers, it has planned and codified all its production methods and management system in such a way that through the production of quality products that are in accordance with international standards, it has realized its practical adherence to the set goals in order to witness The ever-increasing growth of the sales market and access to foreign markets in the near future. In this regard, Sanat Afarin Mahan Company has established and implemented a quality management and environmental management system in accordance with the following standards: ISO IATF 16949:2016، ISO 9001:2015، ISO 14001:2015, ISO17025:2017 As a leading manufacturer, Danesh Banyan Sanat Afarin Mahan is equipped with the most advanced fully automatic machines in its production lines and has a daily production capacity of 3000 pieces of automotive catalytic converters. Sanat Afarin Mahan manufactures catalytic converters in a wide range of gasoline and dual-fuel vehicles, which always considers itself committed to designing high-quality products in accordance with global standards for car manufacturers and after-sales services.

Board of Directors

The professional team of Sanat Afarin Mahan is proud to have received many certifications which have already been seen in this section.

فروشگاه صنعت افرین ماهان

Research and development license

فروشگاه صنعت افرین ماهان

ISO 14001 certification

Research and development certificate

فروشگاه صنعت افرین ماهان

ISO-9001-2015 certificate

فروشگاه صنعت افرین ماهان

IATF-16949-2016 certification

ISO-9001-2015 certificate

units organizational Company

Sanat Afarin Mahan Company is divided into the following categories:

  • Administrative department
  • production lines:
  1. Canning
  2. Coating
  • Laboratory
  • Research and Development Unit (R&D)
اسلاید قبلی
اسلاید بعدی

units organizational Company

The coating line consists of three parts:

– Strengthening: Preparation of catalytic slurry, according to the catalyst formulation, one or more catalytic slurry may be prepared for each car.

-Covering: According to the formulation, one or more different grouts prepared in the previous section may be layered on the ceramic monolith with a certain amount and height.

– Calcination: The monolith coated in the previous step is dried and calcined during a heat treatment. Then the calcined monolith (catalyst) enters the Koenig line and according to the design of the car exhaust and the use of thermal insulation called Matt and other desired metal parts using the welding process, the Koenig operation is carried out and after performing quality control tests and The final inspection of the production of the catalyst set is completed.

our products

Smoke manifold and Shahin EURO5 catalyst set of Megamotor company

Exhaust manifold and Tiba EURO4 catalyst set of Megamotor company

Exhaust manifold set and Pride EURO4 catalyst of Megamotor company

Tiba Euro 5 Catalyst smoke and exhaust manifold set by Megamotor company

Tiba CNG Euro 5 smoke and exhaust catalyst manifold set by Megamotor company

DUMI export pride smoke manifold and catalyst of Megamotor company

Thermal cover of Dod Pride manifold

Thermal cover of Tiba smoke manifold

Exhaust manifold set and TIBA EURO4 catalyst of Saipa Yadak company

Apco high shock absorber base

NIB front exhaust pipe set without flexible EURO5 Nissan (Zamiad)

NI front exhaust pipe set without flexible EURO5 Nissan (Zamiad)

Nissan EURO5 flexible exhaust pipe set - common in NI and NIB - (Zamiad)

Nissan modulator bracket, Zamiyad company

The official teaser of Sanat Afarin Mahan Company

Integrated management system policy

ISO 9001:2015 ISO 14001:2015 IATF 16949:2016

Sanat Afrin Mahan Company, as a manufacturer of all types of car converter catalysts, adopting the basic goal of reducing air pollution with the slogan of breathing clean air, with the aim of gaining customer satisfaction, has planned and codified all its production methods and management system in order to produce high quality products that meet It is based on international standards, it has achieved its practical adherence to the set goals in order to witness the growing growth of the sales market and access to foreign markets in the near future. The implementation of the IMS integrated management system includes quality management and environmental management systems in accordance with the standards, and while adhering to the requirements of this standard, it announces its policies as follows:

Increasing the quality of products by complying with laws, regulations and quality and environmental standards

Continuous effort to increase the satisfaction of customers and beneficiaries

Increasing the ability and awareness level of employees and maintaining human resources

Compliance with national and international regulations and laws applicable in the fields of quality and environment

Protecting the environment through the prevention of water, soil and air pollution

Modifying the consumption pattern through the management of natural resources and energy

This policy has defined four wooden goals for all the qualitative goals according to the strategic direction of the organization, these goals are reviewed according to the guidelines of the policy in the management review meetings, in order to ensure continuity and appropriateness. The commitment to the continuous improvement of the integrated management system and the estimation of customer requirements and legal requirements related to the company’s activities is the belief of all managers and personnel of the organization. And the senior management, while committing to complying with the principles of the policy, declared their support for the integrated management system, and accordingly, all the employees of the company are required to move in the direction of the set goals and are aware of the understanding of this standard, rules and requirements of the customers.

Terms and Conditions
Warranty provisions and after-sales service

Samcat catalyst converters are delivered to customers with 18 months warranty and after-sales service. The provisions of the parts warranty include failure in the emission test of technical examination centers, rotting and breaking of parts, and monolith crushing.

In case of a defect that includes the provisions mentioned in the warranty, contact the expert of the sales department |02634764141| Call.

After discussion and necessary investigations, if confirmation is received from the relevant expert, the defective part will be returned to Sanat Afarin Mahan Company and after analysis by the quality control department, a new part will be sent.

It should be noted that it is necessary to attach the technical inspection sheet to return the product

Damage during shipping

In line with its customer-oriented protocol, Sam Cat has always tried to deliver all shipments to its consumers all over the country in complete health and safety.

Knowing that our products are packaged in a standard and safe manner, after delivery to the selected postal company, the responsibility for any defects and accidents during transportation and delivery is the responsibility of the said company.

Sam Cat will compensate the damage only if it receives confirmation from the relevant transport company.

Damages caused by transportation must be reported to the company's support department within 24 working hours after delivery, and the damaged product must be sent to the company's sales department along with the required attachments (the official meeting minutes of the relevant transportation company - invoice and other accessories). be sent

Regulations for sending goods

Sanat Afarin Mahan Company sends its products through mail, T-box, private mail, air mail, etc.

Sending to dear consumers. The cost of sending all products is the responsibility of our dear customers. Samkat delivers orders to consumers only on working days of the week (Saturday to Wednesday) 48 hours in Tehran and 72 to 120 hours in other cities.

Privacy Policy

All the information entered by the users such as their address, phone number and private information are protected by Sanat Afarin Mahan Company and are registered in the system only to provide services to customers. SAMKAT always tries to protect its customers' information by using the latest security protocols had.

It is worth mentioning that all the elements and contents produced and included in the site are among the digital assets of Sanat Afarin Mahan Company, and any misuse and publication of the site contents without obtaining the permission of Zesmi will be prosecuted.

قبل
بعدی
error: Content is protected !!